Overview of the responsibilities of an Authorised Switching Operator at Western Power, including the use of GEOVIEW, POF and SPIDAweb. Note: The eNAR process is covered in greater detail in PTS 859 – Introduction to eNARs. Course duration 2 days Suitable for People who raise eNARs or need to understand the eNAR process, including: Cert III distribution lineworkers Cert III distribution cable jointers electricians transmission lineworkers transmission cable jointers. Course includes...
[More]
$815.71Limited
GST free
Introduction to switching operations
<p>Overview of the responsibilities of an Authorised Switching Operator at Western Power, including the use of GEOVIEW, POF and SPIDAweb.</p><p><strong>Note:</strong> The eNAR process is covered in
This five day course provides training aligned to the Western Power LOU (low voltage overhead and underground) switching authority level. This course includes: low voltage overhead and underground switching authority level low voltage overhead and underground switching procedures drop out fuse and HV live line taps for single transformer’s access to LV only Who should attend This course is suitable for people who are required to work as an authorised Western Power LOU switching...
[More]
$2,581.94Limited
GST free
Low voltage network switching
<p>This five day course provides training aligned to the Western Power LOU (low voltage overhead and underground) switching authority level. This course includes:</p><ul><li>low voltage overhead and
This 10 day course provides training aligned to the Western Power HOU (high voltage overhead and underground) switching authority level. This course includes training to: enable/disable circuit breaker protection devices (auto-reclose and sensitive earth fault) interpret flags as may be required by the Network Controller. Note: A visit to a substation is included in this course. Who should attend This course is suitable for people who are required to work as an authorised Western...
[More]
$3,872.91Limited
GST free
High voltage network switching
<p>This 10 day course provides training aligned to the Western Power HOU (high voltage overhead and underground) switching authority level. This course includes training to:</p><ul><li>enable/disable
This two day course provides participants with the skills and knowledge to conduct service connection tests using Western Power’s requirements and procedures and then carry out those tests on different types of metering configurations. Who should attend This course is designed for participants who will be required to conduct service connection testing. Please note: Whilst Apprentices are permitted to attend the course, they are only permitted to do service connection tests under...
[More]
$582.75Limited
GST free
Service connection testing (metrel polarity plus)
<p>This two day course provides participants with the skills and knowledge to conduct service connection tests using Western Power’s requirements and procedures and then carry out those tests on
<p>This two day course provides participants with the skills and knowledge to conduct service connection tests using Western Power’s requirements and procedures and then carry out those tests on
This one day course will provide participants with the skills and knowledge to undertake the responsibilities of Recipient in Charge (RIC) to receive Vicinity Authority permits. Who should attend This course is suitable for existing recipients within the Western Power permit to work system who require Recipient in Charge (RIC) to receive Vicinity Authority permits. Prerequisites The prerequisites for attendance at this training course are: Network authority card (NAC) Note: All...
[More]
$259.88Limited
GST free
Recipient In Charge (RIC) for vicinity authority
<p>This one day course will provide participants with the skills and knowledge to undertake the responsibilities of Recipient in Charge (RIC) to receive Vicinity Authority permits.</p><h2 id="
Knowledge and skills associated with Western Power Switching Operator authority levels Zone Substation (ZS), Terminal Substation (TS) and Transmission Lines (TL) as stipulated in the Electrical System Safety Rules (ESSR), Appendix 4 – Transmission Switching Levels. Course duration 15 days Suitable for People who are required to work as an authorised Western Power ZS, TS Switching Operator and/or TL Transmission Lines. Course includes Learning outcomes – zone substation (ZS)...
[More]
$5,959.97Limited
GST free
Zone and terminal substation transmission switching
<p>Knowledge and skills associated with Western Power Switching Operator authority levels Zone Substation (ZS), Terminal Substation (TS) and Transmission Lines (TL) as stipulated in the <em>Electrical
This two-day course will provide the learner with the basic underpinning knowledge and concepts of Western Power substation primary plant arrangements. Who should attend This course is suitable for people who are required to work on or near Western Power substations. Prerequisites There are no prerequisite competencies to this unit Learning outcomes As a result of attending this course participants should be able to: describe interconnected and non-interconnected systems describe...
[More]
This course has no current classes. Please
the waiting list.
Assessment of the currency and competency of NA5 authorisation holders. Duration 2 hours Suitable for This assessment is suitable for people who are required to renew their NA5 authorisation. Prerequisites A current NA5 T, NA5 D or NA5 T&D authorisation Assessment includes Demonstration of knowledge of issuing officer roles and responsibilities to issue permits. What to wear PTS dress standards (long sleeve top, long pants & enclosed shoes) Assessments Written assessment...
[More]
This course has no current classes. Please
the waiting list.
Provision of basic knowledge of protection equipment and schemes Course duration 1 day Suitable for Employees and contractors who require a basic knowledge of protection equipment and schemes used in transmission and sub-transmission environments. Recommended for HV switching operators. Course includes identifying non-differential and differential type protection schemes understanding the concept of discrimination and grading identifying different types of mechanical protection...
[More]
This course has no current classes. Please
the waiting list.
Identify, operate and program Schneider reclosers and load break switches using WSOS 4 software. Reclosers and load break switches are electronically controlled pole-top-mounted switchgear – these form part of Western Power’s HV overhead network protection. Course duration 5 days Suitable for People who are required to program, commission and maintain Schneider Reclosers and Load Break Switches. Course includes the purpose of Schneider switchgear used on Western Power’s network...
[More]
This course has no current classes. Please
the waiting list.
